Renroc Group Engineered Surface Solutions provides industry with state of the art, cutting edge industrial coating technologies that are able to be utilised to Repair, Refurbish, Reclaim and Protect critical Plant and Equipment used in a wide variety of industrial applications.
Abrasion and Wear can shorten the service life of many forms of plant and equipment in many industries. Renroc Group’s Engineered Reinforced Composite technologies work to outperform the OEM substrate as well as act as the sacrificial layer that is replenishable and leaves the original substrate unaffected and structurally sound.
Abrasion and Wear can shorten the service life of many forms of plant and equipment in many industries. Renroc Group’s Engineered Reinforced Composite technologies work to outperform the OEM substrate as well as act as the sacrificial layer that is replenishable and leaves the original substrate unaffected and structurally sound.
When critical parts fail and need to be repaired quickly and reliably, the use of our Engineered Machinable Composites can make the difference between a lengthy and expensive shutdown and the need for parts not readily available to the maintenance team. Renroc Group’s Machineable Composites have the highest specification in the industry for compressive strength and the ability to be formed or machined to fine and original tolerances.
Abrasion and Wear can shorten the service life of many forms of plant and equipment in many industries. Renroc Group’s Engineered Reinforced Composite technologies work to outperform the OEM substrate as well as act as the sacrificial layer that is replenishable and leaves the original substrate unaffected and structurally sound.
Corrosion is encountered in all industries around the world and costs organisations billions of dollars every year and renders critical plant and equipment ineffective and also compromises worker safety. Our corrosion protection coating systems are able to effectively eradicate the effects of severe corrosion.
LEARN MORERenroc Group has over 30 years of experience with Repairing, Refurbishing, Reclaiming and Protecting Chillers, Heat Exchangers, Water Boxes, Baffle Plates, Cooling Towers, Fans, Blowers, CW Pumps, Fire Pumps, Pipe Work and sealing of plant room floors against ingress between floors. Our expertise means that critical HVAC equipment can be refurbished insitu without the prospect of removing damaged equipment from high rise properties. We can work to your schedule and can return equipment back into service within a few days of starting our services or work within the service company or building owners preferred time frames.
LEARN MORECorrosion Under Insulation (CUI) is corrosion that is “out of sight and out of mind” and this severe form of corrosion is often detected only when inspections are made under insulation and cladding. Hidden CUI leads to expensive emergency maintenance to rectify or repair or replace critical process pipes and fittings. Renroc Group’s cutting edge CUI prevention coatings can control and eradicate CUI and offer a new standard of protection for CUI and Insulation professionals. Traditional cladding usually hides and masks the effects of Corrosion Under Insulation.
LEARN MORERenroc Group is proud to introduce the new standard in Ultra Chemical Resistant Coatings for containing hazardous chemicals in all forms of industrial storage applications such as tanks, bunds, pumps or plant and equipment subject to exposure to aggressive chemical exposure.
Learn More
Concrete is one of the most widely used material for construction due to its excellent compressive strength and affordability. When used for industrial applications and when exposed to chemicals, the concrete is subject to chemical attack and ingress.The porosity of the concrete means that it absorbs moisture and chemicals like a sponge. This constant exposure to chemicals can affect concrete substrates until they fail by nullifying the natural alkalinity of the concrete and this causes the reinforcement to corrode and causes spalling (concrete cancer) Renroc Groups Ultra High-Performance Concrete Coatings offer unprecedented protection to concrete bunds, structures and where Positive Chemical Containment is required by EPA and other monitoring authorities.
Metal substrates are generally selected by Engineers for their inherent structural strength but are subject to having a weak surface layer, whether it’s a destructive or protective oxide layer, metals suffer from the constant cycle of corrosion/erosion that progressively work to eventually the weaken the metal substrate if not appropriately protected in service..
Renroc Group are proud to provide industry with specialised coating systems that offer major improvements in the area Health, Safety and Environmental Protection. Our plant surveys scope and measure the risks that are known or unknown and provide the right solution to any HSE requirement.
Our heat protection coatings can reduce the surface temperature of process vessels such as heaters, heat exchangers and equipment that put the worker at risk of serious burns and injuries. Renroc Group provide the new bench mark in personnel protection with its range of heat reducing coatings that are both protective to the workers and the equipment.
Thermal insulation is often treated by expensive conventional cladding and insulation that assists to propagate corrosion that is usually not easily visible. Renroc Group’s decades of experience with the Oil & Gas industries means that we can offer the latest state of the art Thermal Insulation Coatings that are also approved by Oil & Gas and can reduce heat loss by up to 60%.
Anti Slip Safety traction systems from Renroc Group enable organisations to prevent and minimise slips and falls due to low traction slippery surfaces. Our safety traction systems prevent slips and falls and are extremely durable and able to designed to fit in with corporate and OH&S requirements.
Renroc Groups range of Positive Chemical Containment Coatings provide environmentatl protection from chemicals that can leach into the ground, water table and waterways. These coatings prevent chemical seepage from entering the environment and destroying chemical bund infrastructure and are monolithic, systems with no joins or seams. Chemical tiled areas potentially have at least 15 linear metres of joints and leak paths to the bund structure and finally contaminate the ground below.
Emergency repair materials from Renroc Group offer maintenance departments can utilise user friendly effective emergency repair compounds to get equipment running quickly when the outage is unplanned. Pipe leakage causes major problems for industry as well as environmental and worker safety. Renroc Group’s new cutting edge pipe repair wraps are easy to use when plugging and sealing emergency leaks throughout the plant. Consult with our technical department to devise an emergency plan and training.
Renroc Group was established in 1991 supplying pumps and fluid handling systems to many industries.
To find your local specialist applicator for our range of coatings and surface solutions please see our applicator finder.
Renroc Group carries a diversified range to serve Mining, general industry and the power sector we’re able to find the best solution.
Find Out MoreWe aim to educate our clients on our range, industry standards and technologies to assist in helping you find the best solution.
Please check our upcoming webinar calendar and sign up to learn more about our technologies.
Need to educate your team on something? Our Lunch & Learn’s provide a technical presentation during lunch with catering and question time.